How can I configure the source of energy production that's shown in Enlighten?
If a system is equipped with a production meter, you can configure the source of the energy production that's shown in Enlighten in the Display Settings panel of the Settings tab (
).
If the system doesn't have AC Batteries, you can choose to display measurements from the microinverters. If a system has one or more AC Batteries it must use meter measurements. When a system is configured to use meter measurements, all values come from the meters except for those displayed on the array view, which come from the microinverters.
When a system is configured to use meter measurements, Enlighten displays an “M” next to each measurement on the system sidebar.
In addition, when a system uses meter measurements, you can change the start date or offset the amount of lifetime energy reported by a system’s meter.
