Featured Training Videos & Webcasts
-
Short (<6 minutes)
Learn how to install consumption CTs and verify installation
Learn how to install Consumption CTs and verify installation using Installer Toolkit.
-
Long (>10 minutes)
Designing Systems with Enphase M250 Microinverters
Review the steps required to design a system with the Enphase M250 Microinverter
-
Short (<6 minutes)
Configuring an Envoy-S Metered with Installer Toolkit
Learn how to use Installer Toolkit to configure the Envoy-S, commission your site and more!
-
Short (<6 minutes)
How to select a grid profile using the Enlighten Activation form
Watch this video to learn how to apply the a grid profile using the Enlighten Activation form and then generate a compliance report for your utility.
-
Short (<6 minutes)
Assigning Microinverter Serial Numbers on Your iOS Device
Learn how to assign microinverter serial numbers to a module location if the microinverters have been detected by an Envoy but not yet placed in an array.
-
Homeowner Series: Introduction to the Enlighten mobile app
Watch this video to learn about the features of the Enlighten mobile app and how to access them.
-
Introductory Webinar for Homeowners
Curious about your new Enphase solar installation? Watch this pre-recorded webinar to learn what makes your Enphase system different, how to navigate MyEnlighten and more.
-
How to select a grid profile using Installer Toolkit
Watch this video to learn how to apply the a grid profile using Installer Toolkit and then generate a compliance report for your utility.
-
Right Sizing Storage Using System Advisor Model (SAM)
Watch this pre-recorded webinar to learn how to use the System Advisor Model (SAM) from NREL to right size your Enphase storage systems.
-
IQ: Assembling the Enphase Field Wireable Connectors
In this video, we’ll demonstrate how to assemble the field wireable connectors.
-
AC Module RMA Process in Installer Toolkit
In this video, we’ll demonstrate how to use the Installer Toolkit to replace a component of an AC module - either the microinverter or the PV module. This process applies to AC modules only and not stand-alone microinverters.
-
Locating a System in Installer Toolkit
In this video, we’ll demonstrate how locate a system in the Installer Toolkit Mobile App.
-
Design and Plan for the Enphase Storage Solution
Watch this pre-recorded webinar to learn how to design and plan for installation of the Enphase Storage Solution.
-
How to Install and Commission the Enphase Storage System Using the Installer Toolkit Mobile App
Watch this pre-recorded webinar to learn how to prepare for and complete the mechanical installation of the Enphase AC Battery and how to commission the complete system using the Installer Toolkit Mobile App.
-
IQ: Assembling the Enphase Q Cable Terminator
In this video, we’ll demonstrate how to assemble the Enphase Q Cable Terminator.
-
Introduction to Enphase IQ System Installation
Watch this pre-recorded webinar to learn how to install the Enphase IQ System.
-
How To Install Storage Monitoring and Control Components
Watch this pre-recorded webinar to learn how to install the Envoy and CTs for your storage installations.
-
Configuring the Time-of-Use Tariff Rate Structure in MyEnlighten
In this video we'll show you how to program the Envoy to control the AC Batteries’ charge and discharge behavior, to ensure that stored energy is saved for use when electricity cost is highest.
-
Combiner: Introduction to the New AC Combiner Box...Shipping Now!
In this video, we'll walk through the changes that you will see with the updated AC Combiner Box.
-
Introduction to Enphase IQ System Design
Watch this pre-recorded webinar to learn best practice for IQ System design.
-
Creating Company and User Accounts in Enlighten Manager
This video will explain how to create and edit company and user accounts in Enlighten Manager.
