Featured Training Videos & Webcasts
-
Short (<6 minutes)
Learn how to install consumption CTs and verify installation
Learn how to install Consumption CTs and verify installation using Installer Toolkit.
-
Long (>10 minutes)
Designing Systems with Enphase M250 Microinverters
Review the steps required to design a system with the Enphase M250 Microinverter
-
Short (<6 minutes)
Configuring an Envoy-S Metered with Installer Toolkit
Learn how to use Installer Toolkit to configure the Envoy-S, commission your site and more!
-
Short (<6 minutes)
How to select a grid profile using the Enlighten Activation form
Watch this video to learn how to apply the a grid profile using the Enlighten Activation form and then generate a compliance report for your utility.
-
Short (<6 minutes)
Assigning Microinverter Serial Numbers on Your iOS Device
Learn how to assign microinverter serial numbers to a module location if the microinverters have been detected by an Envoy but not yet placed in an array.
-
Homeowner Series: Introduction to the Enlighten mobile app
Watch this video to learn about the features of the Enlighten mobile app and how to access them.
-
NEW Array Builder: (1) Build a Simple Array Layout in Enlighten
Follow this step-by-step to create a simple array layout using the new array builder.
-
How to install the Electrical Receptacle in the IQ Combiner 3
Learn how to install the optional electrical receptacle (AC outlet) in the IQ Combiner 3
-
Installing the IQ Envoy
In this video, we will walk through the process for installing the IQ Envoy.
-
Envoy PCB Replacement in the Enphase IQ Combiner 3
This video will walk through the process for replacing an IQ Envoy circuit board in the Enphase IQ Combiner 3.
-
Service-on-the-Go with Enlighten Manager and Installer Toolkit
Learn how to use Service-on-the-Go to quickly process returns and replacements and reduce truckrolls. Service-on-the-Go removes the administrative steps in device replacements. Devices are automatically retired, replaced and the array updated in Enlighten
-
Arc Fault Demonstration
Watch this video demonstration of arc fault behavior to learn why the Enphase solar system is the safest on the market
-
Understanding Your Utility Bill for Homeowners
Sometimes the hardest part of going solar is understanding your electric bill when the installation is complete. Watch this pre-recorded webinar to learn more.
-
The Enphase Meter Wizard
The Meter Wizard will help you successfully verify and configure Enphase metering for your customers.
-
Service-on-the-Go
Self-service return and replacement to help you manage devices with just a few clicks
-
IQ: Microinverter Rooftop Installation
This video will assist you in installing your Enphase IQ 7/7+ microinverters on the rooftop.
-
Edit an Array in Enlighten
Learn how to edit an existing array in Enlighten using the Array Builder
-
Build a Complex Array in Enlighten
Learn how to build a complex array in Enlighten using the Array Builder
-
Build a Simple Array in Enlighten
Learn how to build a simple array in Enlighten using the Array Builder
-
Using the Meter (CT) Installation Checklist
This video will assist you in installing and troubleshooting your Production and Consumption CTs by introducing the Meter (CT) Installation Checklist.
-
IQ: Introducing the Enphase IQ Combiner +
This video, for solar professionals, explores the features of the Enphase IQ Combiner+ including support for installations of up to 80A of PV and/or storage circuits.
