How do I create a wireless access point on the Envoy?

Wireless Access Point

Use the Envoy to create a wireless access point so you can connect to the Envoy with the Enphase Installer Toolkit mobile app.

Depending on your Envoy type, the Wi-Fi wireless adapter is either internal, or an external USB Wi-Fi adapter is required.

For Envoys with the built-in internal wireless adapter:

  1. Press and release the Wi-Fi button. Wi-Fi AP mode remains enabled for 8 hours.
  2. On your mobile device, select Settings then select Wi-Fi.
  3. From the list of available networks, select "Envoy_nnnnnn", where "nnnnnn" represents the last six digits of the Envoy serial number.

For Envoys requiring an external USB Enphase wireless adapter:

  1. Confirm that the Envoy is running software version 3.11 or higher.
  2. Install the external USB Enphase wireless adapter
  3. Press and hold the menu button on the Envoy. Release the button when Enable Wi-Fi AP is displayed. Wi-Fi AP mode remains enabled for 8 hours.
  4. On your mobile device, select Settings then select Wi-Fi.
  5. From the list of available networks, select "Envoy_nnnnnn", where "nnnnnn" represents the last six digits of the Envoy serial number.

Once you have connected your movile device to the Envoy's wireless access point, use the Installer Toolkit app to complete the Envoy commissioning and confirm the system is operating normally.