Manual Provisioning of Microinverters using Enlighten Manager

Enlighten Manager provides a feature that allows you to Add and/or Provision microinverter serial numbers manually. In case the microinverter is already added, this allows the provisioning task alone to be issued.

Steps to manually provision a new microinverter:

1. Go to Systems and select the site from the list.



2. Click on Devices.



3. Scroll down to Add or/and Provision Microinverter.





4. Click on Select Envoy, select the Envoy serial number you wish to add a microinverter to from the drop-down list, then type in the microinverter serial number, and click Provision.

Repeat Step 4 as many times as needed to add and/or provision multiple microinverters to the Envoy.